Beitrag
Stratified debris slope deposits in the Hindu Kush, Pakistan
Wasson, R. J.
Zeitschrift für Geomorphologie Volume 23 Issue 3 (1979), p. 301 - 320
56 Literaturangaben
veröffentlicht: Sep 26, 1979
ArtNo. ESP022002303006, Preis: 29.00 €
Abstract
Debris slopes in Chitrāl, Pakistan Hindu Kush, fall into two groups: Group 1 with vertical heights between 40 and 350 m and slopes between 30 and 38° and Group 2 with vertical heights between 2 and 20 m and slopes between 9 and 30°. The slopes are at present being modified by gullying, sheet erosion, and some are being undercut by streams. The internal stratification of the slopes is well exposed as a result of this erosion. The processes operating on the slopes at the present time are the same as those which produced the stratified deposits within the slopes. These processes have been identified by direct observation and by inference from the nature of the deposits. The coarse openwork beds of the Group 1 slopes are the result of either single particle rockfall or grainflow; the matrix-supported deposits are mass-movement phenomena; and the thinnest sheets of matrix-supported sediment are thought to be viscous debris flow deposits (or solifluction sensu stricto). The Group 2 slopes are finely bedded and are examples of grézes litées where openwork beds with isotropic clast fabrics are single particle rockfall accumulations, anisotropic openwork gravels may be the result of slopewash, and thin viscous debris flow deposits also occur in the second group of slopes. Any general interpretation of high-angle or low-angle stratified slope deposits as the result of nivational processes may be in error, for some of the slope processes identified in Chitrāl are not dependent upon the presence of snow where there is an opportunity for rockfall onto the slope. Explanations of talus formation need to account for a combination of processes on any one slope.
Kurzfassung
Schutthänge in Chitrāl, pakistanischer Hindukush, sind in zwei Gruppen einzuteilen: Gruppe 1 hat Höhenabstände zwischen 40 und 350 m und Neigungen von 30° bis 38°, und Gruppe 2 hat Höhen zwischen 2 und 20 m und Neigungen von 9° bis 30°. Die Hänge werden derzeit verändert durch Zerrunsung, flächenhafte Abtragung, und einige werden fluviátil unterschnitten. Als Ergebnis dieser Abtragung ist die interne Schichtung gut exponiert. Die Prozesse, die heute auf den Hängen wirken, sind dieselben, die die geschichteten Ablagerungen bewirkten. Diese Prozesse wurden direkt beobachtet und aus der Art der Ablagerungen erschlossen. Die Schichten aus grobem Blockwerk an Hängen der 1. Gruppe entstanden entweder durch Steinschlag oder durch gravitatives Gleiten; der durch eine feinkörnige Matrix verbundene Schutt ist das Ergebnis von Massenbewegungen; und die dünnsten Lagen von Fein- und Grobmaterial werden als Ablagerungen von viskosen Schuttfließungen (Solifluktion - sensu strictu) gedeutet. Die Hänge der Gruppe 2 zeigen feine Schichtung und sind Beispiele für grézes litées, wo Blockwerklagen mit isotropen Trümmerstücken aus einzelnen Steinschlägen resultieren, antisotropes Blockwerk das Ergebnis der Hangabspülung sein mag. Dünne Lagen viskosen Bodenfließens kommen ebenfalls auf den Hängen der 2. Gruppe vor. Jede generelle Erklärung der stark oder schwach geneigten geschichteten Hangablagerungen durch Nivationsprozesse mag falsch sein, da einige der Hangprozesse, die in Chitrāl abgeleitet wurden, nicht von einer Schneedecke abhängen, wenn die Möglichkeit von Steinschlag auf dem Hang besteht. Die Erklärung der Schuttkegel muß eine Kombination von Prozessen auf jedem Hang einbeziehen.
Résumé
Des débris de versants observés dans le Chitrāl (Pakistan Hindukusch) peuvent être classés en deux groupes: 1. Ceux d’une hauteur de 40 à 350 m. avec des pentes de 30° à 38°, 2. ceux d’une hauteur de 2 à 20 m. avec des pentes de 9° à 30°. Les pentes sont actuellement modifiées par le ravinement, l’érosion en nappe et quelques-unes sont aussi traversées par des cours d’eau. En conséquence de cette dernière érosion, il existe des coupes dans les dépôts. Les processus qui façonnent aujourd’hui ces pentes sont identiques à ceux qui sont responsables de l’édification des dépôts. Les processus ont été identifiés par observation directe et par l’analyse des dépôts. Les couches de gros blocs (groupe 1) se sont constituées par éboulement ou bien par glissement sous l’effet de la gravité. Les dépôts fins de la matrice résultent de mouvements de masse. Les plus fines couches de matériaux fins et grossiers sont attribuées à des écoulements visqueux (solifluxion sensu stricto). Le dépôts du groupe 2 montrent un fin litage et sont des exemples de grèzes litées dans lesquelles on trouve des lits de débris éboulés, des lits de graviers hétérogènes lavés par le ruissellement sur les pentes ainsi que de fins depots résultant d’écoulements visqueux. Tout interprétation invoquant l’action de la nivation serait erronnée car quelques-uns des processus de versants identifiés dans le Chitrāl sont indépendants de la présence de neige où existe une possibilité de chute de blocs sur des versants. Les explications relatives à la formation des cônes de débris supposent des combinaisons particulière de processus sur chacune des pentes.
Schlagworte
debris slopes • gullying • sheet erosion • streams • deposits • fabrics • rockfall • Chitrāl • Hindu Kush • Pakistan